JP HD series has a modular design and a wide range of in / out-feed configurations. This makes the JP HD Spiral flexible and the spiral can be customized to your needs so it fits perfectly in your production environment. With a radius of only 500 mm and an area of 1636 mm, you can maximize the floor area. By using strong stainless steel bearings on both sides of the belt, the belt always remains in place and ensures quality and reliability
Technical specifications of JP HD Spiral:
– Heavy loads up to 45 kg / m.
– Spiral for ascending and descending (or reversible).
– High belt speeds up to 35 m / min.
– Inclination to 20º .
Belt: | PA6 Glass fibre reinforced, Polyamide, Stainless-steel rods and links, Desmopan anti-slide (option) |
Belt width: | 308 mm (12”) |
Belt pitch: | 27.4 mm (1.08”) |
Belt thickness: | 19 mm |
Rod diameter: | 6 mm Stainless steel |
Inside belt radius: | 500 mm |
Outside belt radius: | 808 mm |
Guide bearing middle: | Stainless steel 627-2RS (Ø 22) |
Guide bearing outside: | Stainless steel 627-2RS (Ø 22) |
Frame material: | Stainless steel or painted steel |
Sprocket: | Z = 14, Acetal (POM), Stc = 123.13 |
Max. belt speed: | 35 m/min |
Temperature range: | 0 - 60 °C |
Drive method: | Sprockets (positive driven |